Our opinion on the 10CV three-phase pellet press from the GeoTech brand

Hello everyone, today we are going to talk to you about the Pellet press three-phase. You know, this machine that transforms your organic waste into small wood pellets, also called pellets. It’s a bit like having your own candy factory, but here the candy is pellets for heating.

If you are looking for a single-phase pellet press, go to the following page: Single-phase pellet press

Machine presentation

There Pellet press is a real small pellet production factory. Imagine yourself in the shoes of an orchestra conductor, directing a symphony of pellets. The heart of this machine is a 10 HP three-phase electric motor which powers two road rollers. These ensure the pressing of the material inside a circular die of 200 mm in diameter.

The machine is equipped with a loading hopper for the material to be crushed and an ejection chute for the exit of the pellets. To give you an idea, it’s like putting stale bread in a toaster and perfectly browned toast comes out.

Produits similaires

Detailed presentation of the machine

There GeoTech 10 HP Three-phase pellet press is a true technological marvel. It is to the manufacture of pellets what the tractor is to agriculture: an essential tool.

The heart of the machine

At the heart of this machine you will find a 10 HP three-phase electric motor. It’s a bit like the engine in a race car, but instead of propelling you at full speed down the highway, it powers two steamrollers. These rollers are in turn equipped with two bearings each, guaranteeing efficient pressing of the material.

The matrix and the sector

The matrix, with a diameter of 200 mm, is where the magic happens. It’s a bit like a pastry chef’s mold, which transforms shapeless dough into delicious biscuits. Here, the material is transformed into pellets thanks to the pressure exerted by the road rollers.

And if you want to vary it up a little, no problem! You can replace the die to obtain pellets of different diameters (4 – 6 – 8 mm). It’s like having several cookie molds to vary the pleasures.

The loading hopper and the ejection chute

The loading hopper is where you feed the material to be ground. It’s a bit like the entrance to a big slide. Once the material is crushed and turned into pellets, it exits through the discharge chute, which is the other end of the slide.

Controls and accessory compartment

The controls, very simple and intuitive, are placed on the front panel of the device. It’s a bit like the dashboard of your car, where everything is within easy reach.

The machine also has an accessory compartment, equipped with a key lock. It’s a bit like the glove box of your car, where you can store all the necessary small tools and accessories.

Produits similaires

Machine performance

In terms of performance, this pellet press does not disappoint. It has an hourly production capacity of between 70 and 90 kg of pellets. It’s like having your own little gold mine in your backyard. The pellets produced have a diameter of 6 mm and a length of between 25 and 35 mm. You can even replace the die to obtain pellets of different diameters (4 – 6 – 8 mm).

Produits similaires

Advantages and disadvantages

Here is a summary table of the advantages and disadvantages of the GeoTech 10 HP Three-phase pellet press :

Benefits	Disadvantages
Large production capacity	Electric cable not supplied
Possibility of changing the diameter of the pellets	Need for an electrician for connection to the electrical network
Easy to move thanks to 2 rubber wheels

Produits similaires

Our experience with the GeoTech 10 HP Three-phase Pellet Press

Packaging

When we received the GeoTech 10 HP Three-phase pellet press, we were pleasantly surprised by the quality of the packaging. It’s a bit like receiving a carefully wrapped gift for Christmas. Everything was well protected and secure, which immediately gave us a good impression.

Mounting

Assembling the machine was an interesting experience. It’s a bit like putting together a puzzle, where each piece has its place. The instructions were clear and easy to follow, although we would have appreciated some additional illustrations. However, with a little patience and perseverance, we managed to assemble the machine without much difficulty.

Initial use

At the beginning, the use of GeoTech 10 HP Three-phase pellet press was a little confusing. It’s a bit like driving a new car for the first time, where you have to get used to the feel and responsiveness of the machine. However, after some trial and error, we started to feel more comfortable.

Use after a few hours

After a few hours of use, we really started to appreciate the GeoTech 10 HP Three-phase pellet press. It’s a bit like after driving a car for a while, you start to appreciate its features and performance. The machine operates smoothly and efficiently, producing pellets of consistent quality. In addition, the possibility of changing the diameter of the pellets is a real plus.

In conclusion

In summary, our experience with GeoTech 10 HP Three-phase pellet press was very positive. Despite a few small obstacles during assembly and initial handling, we were impressed by the performance and quality of this machine. It’s like having a little personal assistant that turns your waste into precious pellets. We recommend it without hesitation to anyone looking for an effective solution for pellet manufacturing.

The similar pellet machine we recommend

To begin with, a little less powerful but just as efficient the Geotech 5.3CV pellet press.

Using pellets for heating

The pellets produced by the this pellet production line are perfect for heating with a pellet stove. It’s a bit like having your own renewable heat source at home.

Pellets are a very efficient and environmentally friendly heating source. They burn very cleanly, producing very little ash. Additionally, they are easy to store and handle, making them very practical for daily use.

Using a pellet stove for heating has several advantages. First, it provides consistent, comfortable warmth. It’s a bit like having a fireplace that burns continuously, without having to worry about adding wood. In addition, the pellet stove is very easy to use and maintain.

In short, using pellets for heating with a stove is a solution that is practical, economical and ecological. With the GeoTech 10 HP Three-phase pellet press, you can produce your own pellets and enjoy comfortable heating all winter long.

Produits similaires

Our opinion

In conclusion, we are very satisfied with the Pellet press. It is efficient, easy to use and offers great flexibility in terms of pellet size. It’s like having a hardworking little elf in your garden, turning your waste into precious pellets. However, remember that the electrical cable is not provided and that it is preferable to call an electrician for the connection to the electrical network.

So, what are you waiting for? Transform your waste into green gold with GeoTech 10 HP Three-phase pellet press !

Produits similaires